Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Henderson
If your driveway gate stopped opening, is reversing halfway, or needs a motor it never had, we handle it. Vance Gate Repair Whitney works on gate motors and openers across Henderson every week, from Green Valley and Seven Hills to Anthem and MacDonald Ranch. We know these neighborhoods block by block – the 1990s and 2010s tract homes, the stucco pilasters with wrought-iron gates set into them, and the caliche three inches under the surface that turns a simple post job into a trenching project. Henderson gates fail in ways that surprise people from wetter cities, and knowing that shortens the fix. Call (844) 797-4861 and a live person answers, day or night.
Why Vance Gate Repair Whitney Is Henderson’s Preferred Gate Motor & Opener Company
Henderson homeowners research before they call, and that suits us. We put the price in writing before anyone picks up a tool, so you see the number before the work starts. Every visit leaves a photo record – what we found, what we set, what we installed – filed with the job and handed to you. Under the Haven Standard’s 365-Day Done Right Promise, if a repair isn’t right, we make it right at no additional charge within that window. We service nine major automation brands, so we work on the motor already on your property rather than steering you toward a replacement.
Response to Henderson is quick because it’s a big share of what we do. People in 89052 and 89015 call most often, usually after a gate has quit in July. We quote a range on the phone, then confirm the exact price in writing once we see the operator, the run, and the footing.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Henderson

Motor Installation
Adding an opener to a gate that’s always been manual is where Henderson gets interesting. Most of these tract homes were built with a pre-wire at the masonry pilaster, but the low-voltage conduit run to the operator was never pulled or was run undersized. That means a new LiftMaster or Linear install here usually includes trenching through caliche and pulling fresh conduit, not just mounting an arm. We scope the footing and the power run in writing so the install price you agree to is the price you pay. New installs are scheduled, not same-day, but the measure and the written quote are free.

Motor Repair
Builder-grade operators from the 1990s through the 2010s tract builds are the majority of what we repair in Henderson. They stall and overheat because the original transformer was undersized for summers that run past 110°F. A repair visit means clearing and re-lubing the rack and pinion, resetting the limit switch, testing UL 325 entrapment protection, and photographing each adjustment before we leave.

Linear Motor
Linear operators are common on the slide gates through Green Valley and Seven Hills. They’re dependable when the track stays clean, but monsoon dust packs the rail and the trolley starts dragging. We service them in place rather than pushing a new motor – parts, alignment, and the safety photo-eye checked and documented.

Slide Motor
Slide gate motors on sloped, terraced lots need a footing that holds. Caliche stops a post hole cold, and hillside wind loads work the anchors loose over time. Before we blame the motor, we check whether the gate has sagged on its hinges or its footing. Often the motor is fine and the post is the problem.
We also handle Gate Motor & Opener work beyond these four – intercom integration, battery backup, and access control – when a Henderson property needs the full setup.
Before
AfterTrusted Brands We Service in Henderson
We work on whatever motor is already on your gate. That includes Ghost Controls, DoorKing, and Elite, along with LiftMaster, Linear, FAAC, BFT, Viking, and Mighty Mule. Nine brands, one company, so you aren’t told your motor is obsolete just because it isn’t the one a given shop prefers. We don’t stock parts in a warehouse – we diagnose on site and source the correct part for your model, which keeps turnaround tight without pretending every repair is a same-hour job. If you already have a written estimate from another company, bring it. A second opinion on that paperwork is free.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Henderson Homes

- Undersized transformers in tract homes. The original installer sized the transformer for a milder climate, so the operator overheats and stalls when Henderson summers push past 110°F. Resizing the transformer often solves a “dead motor” that isn’t dead.
- Missing conduit at the pilaster. In these master-planned tracts, the pre-wire stops at the masonry and the low-voltage run to the operator was never completed. Adding a slide motor or intercom later means trenching through caliche and pulling new conduit, not hooking up existing wire.
- Baked lubricant on the rack and pinion. UV and monsoon dust strip the grease and jam the trolley, so the gate drags and the motor works harder than it should. Re-lubing and clearing the track is routine Henderson maintenance, not a repair.
- Clouded photo-eye lenses. Dust and sun dry out and fog the safety photocell lens, causing false reversals and entrapment faults. Realigning and cleaning the photo-eye (the infrared beam that stops the gate if something crosses the path) fixes most of them.
Pricing for Gate Motor & Opener in Henderson, NV
Most Henderson motor repairs run $180 to $420, depending on the operator and whether we’re replacing a board, a transformer, or just realigning and re-lubing. A full motor installation on an existing gate typically runs $1,100 to $2,400, and the biggest variable here is the power and conduit run – trenching through caliche adds labor a wetter metro wouldn’t. Adding battery backup to an existing Linear or LiftMaster operator generally lands between $350 and $700. Intercom integration is quoted per property once we see the wiring. Every price is written and handed over before work starts, and the estimate is free. Call (844) 797-4861 for your Henderson quote.
We Also Serve Cities Near Henderson

Henderson work often spills into the surrounding communities. We also cover Gate Motor & Opener in Henderson and neighboring Boulder City, Whitney, Paradise, and Enterprise. If your gate is on the edge of town along the 215 or out toward the lake, the same written-price, photo-record standard applies. Call and we’ll confirm coverage for your address.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Henderson

Adding an opener means more than bolting on an arm: it usually involves trenching a low-voltage conduit run to the operator, because most 2005-era Henderson tract homes were pre-wired at the pilaster but never pulled the run to the gate. We measure the gate, check the footing and hinge condition, and quote the operator plus the power run in writing before scheduling. New installs are planned, not same-day. Call (844) 797-4861 for a free measure and written quote.
In Henderson’s summer heat, a builder-grade LiftMaster usually reverses because UV has baked the lubricant off the rack and pinion and dust has jammed the trolley, or the safety photocell lens has clouded and throws a false obstruction signal. Clearing and re-lubing the track, realigning the photo-eye, and testing UL 325 entrapment protection resolves most cases. Call (844) 797-4861 and we’ll diagnose it and put the fix in writing.
Often, yes: caliche-heavy soil expands and contracts with the seasons, shifting the post and letting the gate sag, so the motor strains against a gate that’s out of alignment. On sloped lots in Seven Hills and Anthem, the footing is the usual culprit, not the motor. We check the footing and hinges before recommending a motor replacement. Call (844) 797-4861 for an exact quote.
Yes, in most cases battery backup can be added to an existing Linear operator without replacing the motor, so the gate still works during an outage. The cost depends on the operator model and the backup kit, and we quote it in writing first. Call (844) 797-4861 and we’ll confirm what fits your unit.
Ask three things: whether the quote includes the full conduit and trenching through caliche, whether the panel is sized for Henderson’s summer sun and the gate’s daily cycle count, and whether the price is written before work starts. Solar openers on a side-yard gate can work well here if the run and the footing are handled properly. Call (844) 797-4861 for a free written scope.
If your gate motor is stalling, reversing, or your Henderson gate needs an opener for the first time, call (844) 797-4861 for a free estimate. A live person answers around the clock – no voicemail, no callback queue. We’ll put the price in writing before any work starts and leave you a photo record of every adjustment.
Written by the team at Vance Gate Repair Whitney.