Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Enterprise
If your driveway gate has started stalling mid-travel, reversing without warning, or ignoring the keypad entirely, we can help. Vance Gate Repair Whitney handles gate motor and opener work throughout Enterprise, from the gated subdivisions off Silverado Ranch Boulevard to the custom homes tucked along the southern edge of ZIP 89139. A live person answers the phone 24/7 at (844) 797-4861, and every visit starts with a written price you approve before a tool comes out of the case. Enterprise gates are often heavier and more ornamental than the tract-home norm, which makes getting the operator right the first time worth more than a quick patch.
Why Vance Gate Repair Whitney Is Enterprise’s Preferred Gate Motor & Opener Company
Enterprise homeowners tend to research before they call. We’ve built our reputation here by giving them something to check: a written scope, a written price, and a photo record of every adjustment left on file. Our technicians have up to 12 years of experience, we’re independently owned and operated, and we work under The Haven Standard on every job. That means Clause 1 gets honored in Enterprise as everywhere else: the flat price is written and handed over before work begins, not quoted over the phone and revised on the invoice.
We service nine major gate-automation brands, so a property with a LiftMaster, a DoorKing, or a Ghost Controls unit all get the same treatment, and nobody steers you toward a replacement when a repair will do. Every completed repair carries the 365-Day Done Right Promise: if it isn’t right within that year, we make it right at no additional charge. Technicians are background-checked and uniformed, and you get their name and photo before they arrive. For a community manager or HOA board comparing written estimates, we’ll review any competing quote at no cost, which is a service Enterprise boards use more than most.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Enterprise

Motor Repair
This is the work we do most in Enterprise: a builder-grade swing-gate operator that ran fine for a decade and now stalls or reverses at the same spot on every cycle. Often the control board or battery backup has been cooked by 100°F+ afternoons and infiltrated by windblown dust. We test the operator, the safety photocell, and the battery under UL 325, then photograph what we found and what we set. The Gate Motor & Opener team handles the diagnostics, and you get the readings in writing.

Motor Installation
New installation on a custom or ornamental gate in Enterprise is a measured, scheduled job, not a same-day fix. Heavy steel and bespoke gates demand an operator sized to the actual leaf weight and swing arc, and we quote the full scope in writing before ordering anything. That includes matched brackets and, on HOA common-area gates, the board-approved paint color.

Linear Motor
Linear arm operators are common on the driveway gates in Enterprise’s 1990s – 2000s subdivisions, and a misaligned limit switch is frequently the culprit when a gate over-travels or stops short. We diagnose from the street sometimes, by the brand of keypad and the uniform gate color. Resetting the limit and re-securing the arm bracket usually solves it without parts.

Slide Motor
Slide gates drag in Enterprise when the rack and pinion fills with monsoon grit or the track goes out of alignment. A sagging slide gate usually fails at the hinge post and footing, not the panel, so we check the ground before blaming the operator. Where the panel drags, the fix is often structural, not electrical.
Before
AfterTrusted Brands We Service in Enterprise
Enterprise gates run the full range of automation hardware, and we service the brands you’re most likely to find here: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t stock parts on a truck, so nothing gets forced toward whatever’s on hand. Instead we identify the exact model, order the correct part, and keep the turnaround tight. On older builder-grade DoorKing and Ghost Controls units in Enterprise’s gated communities, matching the original keypad model and operator brand to the HOA spec is part of the job.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Enterprise Homes

Enterprise’s desert climate and its housing stock create a predictable set of failures. Here’s what shows up most:
- Heat- and dust-stressed control boards and battery backups. Builder-grade operators in Enterprise take 100°F+ afternoons and windblown grit season after season, so boards and batteries fail intermittently in summer – a gate that works at 7 a.m. and reverses at 2 p.m.
- Slide-gate rack and pinion jammed with monsoon grit. When dust storms move through Enterprise, grit packs into the rack and trips the operator’s obstruction sensing, so the gate reverses mid-travel.
- Sagging driveway gates traced to a degraded hinge post. A gate that looks crooked is usually failing at the hinge post or footing, not in the panel – common on shared HOA common-area walls where responsibility gets disputed.
- Misaligned safety photocells and keypad faults. Safety photo-eyes knocked out of line, or a keypad that no longer talks to the operator. Both need a real entrapment check under UL 325, not just a reset.
Pricing for Gate Motor & Opener in Enterprise, NV
Enterprise homeowners want the number on the page before they call, so here it is. Most swing-gate motor repairs in Enterprise run $180 – $420, depending on whether a control board or battery backup is involved. A linear motor repair typically lands at $150 – $350. Full swing-gate motor installation, including brackets and calibration, generally runs $650 – $1,400 for a standard driveway leaf, and more for a heavy ornamental gate that needs a larger operator. Battery backup replacement is usually $180 – $320 installed. Slide motor repair runs $200 – $450, and a sagging gate that needs hinge-post work can add $300 – $800 because the fix is structural. Every price is written and agreed before work starts – no surprise invoice at the end. Call (844) 797-4861 for a free estimate; estimates are free.
We Also Serve Cities Near Enterprise

Enterprise sits close to several neighbors we cover regularly: Spring Valley, Paradise, Winchester, and Henderson. If your gate is in one of those areas, we handle it with the same documented, written-price approach. For homes in Enterprise and the surrounding communities, the work is done by independent local professionals who know the local gate stock. Call us for coverage details.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Enterprise

The HOA board or community manager typically approves it, not just the homeowner at the gate. Because so many Enterprise gates sit on HOA private streets and shared walls, boards usually insist on matching the original builder-grade operator brand, keypad model, and HOA-approved paint color before signing off on a replacement. That’s why we provide a written scope and photo record you can hand to the board. Call (844) 797-4861 for a free estimate – the written price makes board approval easier.
Heat and dust are the usual cause. Builder-grade operators in Enterprise face 100°F+ afternoons and windblown grit that stress the control board and battery backup, so the gate stalls or reverses mid-cycle more in summer than winter. We diagnose the board, battery, and entrapment protection together, then recommend the fix. Call (844) 797-4861 for a free estimate.
You don’t, until a technician tests it. The safety photocell and loop detector must be verified under UL 325, and a visible beam that looks aligned can still fail to stop the gate on contact. We test and photograph the reading on every visit. Call (844) 797-4861 to schedule a check – estimates are free.
It’s often the track or the hinge post, not the motor. In Enterprise, monsoon grit packs into the rack and pinion and trips the obstruction sensing, and a sagging panel usually fails at the post footing. We check the ground before blaming the operator. Call (844) 797-4861 for a free estimate.
Usually yes. Older DoorKing and Ghost Controls units in Enterprise can often be paired with a new intercom and keypad, though the integration depends on the operator’s control terminals. We check compatibility before quoting, so you know what’s feasible in writing. Call (844) 797-4861 for a free estimate.
Whether it’s a cooked control board on a builder-grade swing operator, a slide gate jammed with monsoon grit, or a fresh intercom and keypad to match a heavy ornamental gate, Vance Gate Repair Whitney is ready. We answer live 24/7, quote in writing before any work begins, and leave a photo record on every visit. Call (844) 797-4861 for a free estimate on your Enterprise gate motor or opener today.
Written by the team at Vance Gate Repair Whitney.