Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Boulder City
If your gate motor quit after the last windstorm, you’re not imagining it. Boulder City sits right where monsoon gusts funnel off the McCullough Range, and the motors and footings that hold those gates take a beating every summer. We work on every common brand of gate operator, and we put the price in writing before we touch anything. A live person answers when you call (844) 797-4861, day or night.
Why Vance Gate Repair Whitney Is Boulder City’s Preferred Gate Motor & Opener Company
We’ve repaired and installed 22,000+ gates since 2014, and a steady share of them are here in Boulder City. Customers in 89005 and 89006 keep calling back for one reason: we show them what we found. Every visit leaves a photo record of the adjustments, the limit-switch readings, and the part numbers we installed.
Our technicians have up to 12 years of experience, and they’re background-checked and uniformed. You get the name and photo before anyone shows up. 365-Day Done Right Promise covers the repair for a full year. If it fails, we make it right, no argument and no fee. That’s the whole point of having a written record.
Response across Boulder City stays tight because we know these streets and these gates. The original townsite parcels run at irregular angles, and that shapes how a job goes. Local knowledge saves time, and time is what you lose when a motor is down.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Boulder City

We service nine major automation brands and won’t steer you toward a replacement when a repair will do. Here’s what we handle most often in Boulder City.
Motor Repair
Most dead motors here aren’t fully dead. During a monsoon gust the operator arm twists and the gears strip, or the control board trips after dust and rain get inside. We diagnose the actual failure and photograph the readings before we quote a fix. A typical motor repair in Boulder City runs $180 to $420, depending on the brand and what’s gone wrong.

Motor Installation
A new operator on an old Boulder City gate often means dealing with the post footing first. Many posts sit in concrete poured decades ago, and rusted anchors need to be cut out and re-poured to true plumb before a new motor goes on. That’s the part most quotes skip. A full motor installation here runs $900 to $2,200.

Linear Motor
Linear and similar slide and swing operators are common on the alley-access gates around the historic homes. We service them, reset their limits, and get keypad and loop-detector entry working again. Weather here corrodes limit switches fast, so we always test those in the same visit.

Slide Motor
Solid infill slide gates catch a lot of wind, and that load passes straight into the motor. On a slide gate with an irregular opening, tracking and alignment matter as much as the motor itself. We check the track, the rollers, and the operator together so the fix actually holds.
Before
AfterTrusted Brands We Service in Boulder City
We work on whatever motor is already on your property. That includes Linear, Viking, Ghost Controls, and DoorKing, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. We don’t claim to stock parts locally. What we do promise is a fast turnaround: we identify the part, tell you the written price, and get it ordered without a runaround. If you’ve got a written estimate from another company, bring it by. We’ll give you a free second opinion on it.
Common Gate Motor & Opener Problems We See in Boulder City Homes

- Wind load twisting the operator arm. A solid infill gate works like a sail in monsoon gusts, and when the hinge post is already loose in its old footing, that pressure strips gears. The fix usually starts with the footing, not the motor.
- Heat warping gates until they bind. Mojave summer heat bakes metal and dries timber posts, and the gate starts dragging against the operator. That drag overloads the motor and shortens its life by years.
- Dust and rain killing limit switches. Flash-flood dust and monsoon rain find their way into older operators and corrode the limit switches and photocells. The gate stops answering the keypad even though the motor still has power.
- Posts rotted in aging concrete. Because so many homes here were built on original federal townsite parcels with old alley and driveway access points, technicians routinely find gate posts set in concrete footings poured decades ago. Rusted anchors need to be cut out and re-poured, not just tightened.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Motor & Opener in Boulder City, NV
Here’s what the numbers look like for this market. Keep in mind that a gate opening sized to a 1940s townsite parcel can add time to any job.
| Job | Typical Boulder City Range |
|---|---|
| Motor repair (gears, board, limit switch) | $180 – $420 |
| New motor installation | $900 – $2,200 |
| Battery backup added | $250 – $600 |
| Post footing cut-out and re-pour | $400 – $900 |
What moves the price: the brand of operator, whether the footing is sound, and whether entrapment protection like safety photocells is already in place. We put the flat price in writing and hand it to you before any work starts. No surprise invoice at the end. Estimates are free, and the price you agree to is the price you pay.
We Also Serve Cities Near Boulder City

Our Gate Motor & Opener team covers the surrounding area too, including Henderson, Whitney, Paradise, and Enterprise. If your gate is a few miles out, we can help. You can also read more about Boulder City and the neighborhoods we cover.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Boulder City

Because the wind load on a solid gate stresses the operator arm, and a post that’s already loose in its old footing lets the gate sag and bind against the motor. Monsoon gusts twist that arm hard enough to strip gears. We fix the footing and the alignment, not just the motor, so the repair holds. Call (844) 797-4861 for a free estimate.
Sometimes, but only if the post footing is sound and plumb. If the anchors are rusted into old concrete, a new motor bolted to a sagging post will fail fast. We check the footing first and re-pour it when needed. Then the new operator goes on true. Call (844) 797-4861 and we’ll take a look.
Most operators have a manual release lever or key, and using it the right way prevents injury. Never force a gate that’s stuck; a spring-loaded swing gate can move suddenly. We’ll walk you through the release for your specific brand when you call. Reach us any hour at (844) 797-4861.
A slide operator on a proper track usually handles tight, irregular openings better than a swing arm, which needs clearance to arc. The right choice depends on your gate weight, the wind exposure, and where the post footings sit. We measure and quote in writing before recommending one. Call (844) 797-4861 to schedule a free measure.
Because monsoon storms knock out power here, and a gate that won’t open on battery power leaves you locked in or out. Battery backup keeps the operator working through an outage and rides out short sags and surges. We add it in a single visit, priced in writing first. Call (844) 797-4861 for an exact quote, free.
Get Your Gate Working Again
Whether your operator failed after a windstorm or you’re planning a new installation on an old Boulder City parcel, we’ll put the price in writing before we start and leave you a photo record when we finish. Call Vance Gate Repair Whitney at (844) 797-4861 for a free estimate. A live person answers, 24 hours a day.
Written by the team at Vance Gate Repair Whitney.
