Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Henderson, NV
If a gate on your property has stopped swinging, is dragging on the concrete, or the operator has quit responding to the remote, we can help. Vance Gate Repair Whitney works on driveway gates, side-yard gates, and light commercial entrances throughout Henderson, and a live person answers our phone at (844) 797-4861 around the clock. Response times run short in most of Henderson, and you’ll get a written price before any tool comes out of the truck.
Why Henderson Homeowners Choose Vance Gate Repair Whitney
Henderson homeowners tend to research before they call, and we respect that. What they find with us is a written scope, a written price, and a photo record of everything we touched. Our technicians have up to 12 years of experience, and every one of them is background-checked and dispatched with a name and photo sent to you before arrival. If you’ve collected a written estimate from another company, bring it to us and we’ll review it at no cost. We back every completed repair with our 365-Day Done Right Promise: if it isn’t right, we make it right within a full year, with no additional charge.
We work in the neighborhoods where gates take a beating. In Green Valley, where mature trees and sprinkler overspray shorten the life of hinge hardware, and in Anthem, where hillside wind loads stress operators and rails, our technicians know what typically fails first. We don’t push replacement when a repair is the honest answer, and we service nine major automation brands so we can work with whatever motor is already on your property.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Henderson

Gate Repair
When a gate sags, sticks, or stops latching, we diagnose the cause and fix it, whether that’s a hinge, a post anchor, a roller, or a bent frame. In Henderson’s caliche-heavy soil, post movement is common, and we’ll tell you plainly whether a footing needs attention or a hinge adjustment will solve it. Learn more about our Gate Repair in Henderson.

Gate Installation
We install new driveway and side-yard gates that match developer-era designs and clear HOA architectural review. Whether you’re replacing a gate in MacDonald Ranch or adding a side-yard entrance in Seven Hills, we measure, order, and schedule the work, and we hand you a written price first. Learn more about our Gate Installation in Henderson.

Gate Motor & Opener Service
We repair and service operators from FAAC, BFT, Linear, Viking, and five other major brands, so we work with the motor you already own. When an operator fails, we diagnose it with actual limit-switch readings and photo documentation rather than guesswork. Learn more about our Gate Motor & Opener in Henderson.

Gate Access Control
Keypads, intercoms, remote receivers, and entry systems for residential and light commercial gates. Every installation or repair leaves a wiring diagram and photo record so the next technician never has to reverse-engineer your setup. Learn more about our Gate Access Control in Henderson.
Gate Parts & Welding
Ornamental iron and wrought-iron gates get welded repairs, new hinges, and replacement hardware matched to the existing finish. We source parts for the brands on the property, and we photograph every component before and after installation. Learn more about our Gate Parts & Welding in Henderson, or start back at our home page.
Before
AfterNeighborhoods We Serve in Henderson
We work across Henderson’s master-planned communities and older subdivisions. Typical response time in these neighborhoods runs short, and the same written-price and photo-record standard applies to every visit.
- Green Valley – ZIP 89074, wrought-iron driveway and side gates set in masonry pilasters
- Anthem – ZIP 89044, sloped terraced lots with hillside wind loads on operators
- Seven Hills – ZIP 89052, semi-custom homes with caliche footings and terraced grading
- MacDonald Ranch – ZIP 89012, developer-era ornamental gates under HOA design review
- Lake Las Vegas / Calico Ridge – ZIP 89011, mixed elevations and desert exposure
Why Henderson’s Climate & Housing Affect Gate Repair

Henderson’s gate work is shaped by two things at once: heat and HOA rules. Summer temperatures push past 110°F, UV is intense, and humidity is close to zero for most of the year. That combination bakes lubricant off hinges, dries out and warps wood gates, and can leave operators cycling slower than they should. Then there’s the soil. Caliche and rock sit just below grade in most of the valley, so post anchors and footings don’t behave the way they do in wetter climates. When the ground expands and contracts with the seasons, a post that was plumb in March can be off by a half inch by August. In Anthem and Seven Hills, where lots are sloped and terraced, a post hole can stop cold on caliche and hillside wind loads add strain on top of that. Add the HOA layer and the work becomes a spec-and-footing job, not just a hinge swap. Repair has to match the developer-era design and clear architectural review in Green Valley, Anthem, and MacDonald Ranch, which is why we photograph original hardware and document our work so nothing drifts from spec.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Henderson
Gate repair in Henderson typically runs $150 – $450 depending on what failed and how much disassembly the job requires. Hinge and latch adjustments usually land at the low end; post footing repairs and welding sit higher. Motor and opener repairs generally fall between $200 and $650, again depending on brand and whether the arm bracket is intact. New gate installation is a measured, ordered, and scheduled job with a written price built from the specific gate, finish, and HOA requirements, so we don’t quote it over the phone. Under Haven Standard Clause 1, you get the flat price in writing and agreed before any work starts; no surprise invoice at the end.
Service Area – Cities Near Henderson

We also work in Boulder City, Whitney, Paradise, and Enterprise. If you’re just outside Henderson and not sure whether you’re in our range, call (844) 797-4861 and we’ll tell you straight.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Henderson

Most gate repairs in Henderson run $150 – $450, with hinge and latch work at the low end and post footing or welding repairs higher. Motor and opener repairs typically land between $200 and $650. You get the exact flat price in writing before we start. Call (844) 797-4861 for a free estimate.
In most cases, yes. A live person answers our phone 24 hours a day, seven days a week, and we can often dispatch same-day for repair work in Henderson. Installation and access-control jobs are measured, ordered, and scheduled. Call (844) 797-4861 to confirm timing for your address.
Yes. Many gates in Green Valley, Anthem, Seven Hills, and MacDonald Ranch have to match developer-era design and clear HOA review, and we document original hardware and photos to help your submittal. Call (844) 797-4861 to talk through your community’s requirements.
Often it is. Caliche-heavy soil and seasonal expansion can move a post that was plumb months earlier, especially on sloped lots in Anthem and Seven Hills. We diagnose whether it’s a footing issue or a hinge adjustment before recommending work. Call (844) 797-4861 for an assessment.
Nine major brands, including FAAC, BFT, Linear, and Viking. We work with the motor already on your property rather than steering you toward a replacement. Call (844) 797-4861 to confirm we can service your specific operator.
Contact Vance Gate Repair Whitney
If your gate is dragging, sticking, or your operator has stopped working, call us at (844) 797-4861 for a free estimate. We’ll give you a written price before any work begins, a documented photo record when we’re done, and the 365-Day Done Right Promise behind every repair. We look forward to helping you get your gate working properly again.
Written by the team at Vance Gate Repair Whitney.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Henderson Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.