Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Henderson
If you’re adding a gate to a Henderson driveway or replacing a builder-grade setup that never worked properly, the numbers below are what you’re looking for: a standard single swing gate with automation runs $4,200 – $8,500 in Henderson, and a sliding gate with an operator typically lands between $6,500 and $12,000. Custom wrought-iron and double-gate projects go higher. We write the price down before anyone touches a tool, and you get a photo record of what we found and what we installed before we leave the property. Call (844) 797-4861 and a live person answers, any hour.
We know the terrain here. That matters more than most homeowners expect.
Why Vance Gate Repair Whitney Is Henderson’s Preferred Gate Installation Company
Henderson homeowners already read the three-star reviews before they call anyone. They want the number on the page and the estimate in writing, not a sales visit. That’s how we work. Every job under The Haven Standard starts with a written scope and a flat price handed over before work begins, and every visit finishes with a documented photo log of the hinge positions, sightline measurements, and part numbers we installed.
We’ve repaired and installed more than 22,000 gates since 2014, running both residential driveways and light commercial work, and Henderson is one of the most active areas we cover. Technicians have up to 12 years of experience and are background-checked and uniformed, with name and photo sent before arrival. You’ll get a written quote within the same visit, and you’ll never be handed a range that balloons at invoice time.
Free second opinion on any written estimate from another company. Bring the paperwork and we’ll review it at no charge. If a competitor’s quote has a soft number in it, we’ll tell you where.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Henderson

These are the sub-services that come up most often in Henderson neighborhoods like Green Valley, Anthem, Seven Hills, and MacDonald Ranch.
Driveway Gate Installation in Henderson
Most Henderson driveway gates sit in a masonry pilaster under stucco. Matching the developer-era wrought-iron profile and finish before a single hinge goes in is part of the job, not an afterthought. We measure the opening, photograph the pilaster, and pull the spec sequence before we build.

Swing Gate Installation in Henderson
Swing gates make sense on most Henderson lots, but hillside terraced lots in Anthem and Seven Hills complicate the hinge-post footing. Caliche is often struck within a foot of grade, so the post needs a proper concrete footing rather than a surface anchor. Wind load on an exposed slope also drives the operator sizing choice.

Sliding Gate Installation in Henderson
Sliding gates work well where the driveway is long and flat, common in Green Valley and MacDonald Ranch. The catch is rack-and-pinion alignment: a post that shifts with caliche soil expansion throws the track off by inches. We photograph the alignment readings so the next technician doesn’t start from scratch.

Pedestrian Gate Installation in Henderson
Side-yard and pool-area pedestrian gates often need to match the driveway gate for HOA review. On the small scale, the operator and latch hardware choice is usually where budget lands, not the gate leaf itself.
If you want to see how these fit into our full range of work, our Gate Installation team handles repairs, motors, and access control alongside new installs.
Before
AfterTrusted Brands We Service in Henderson
Most homes in Henderson come to us with one of nine major automation brands already on the property: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We service all nine. That matters when a builder installed a Ghost Controls unit on a gate that’s out of spec, or when a DoorKing access controller needs to be reused on a new operator. We don’t stock parts locally, so parts come on scheduled delivery and are written on the scope. We’ll tell you which brand we’re working with and why.
Common Gate Installation Problems We See in Henderson Homes

Every one of these shows up on a regular basis. None of them are unusual.
- Builder-grade operators failing in the heat. The swing-gate operator a builder installed at closing bakes in 110°F+ UV. Lubricant cooks off, the arm seizes, and the gate stalls mid-travel within a few seasons. This isn’t a hard failure; it’s a wear problem the original equipment was never sized for.
- Posts shifting in caliche soil. Caliche sits just below grade in most of Henderson, and the ground expands and contracts seasonally. Post anchors shift, throwing off hinge-post and rack-and-pinion alignment on slide gates. Tightening the hinge bolt doesn’t fix a post that isn’t where it should be.
- Manual gates automated with no conduit. Plenty of Henderson gates were set manual at build-out and automated later. That means no buried power and often no conduit run to the pilaster. The choice comes down to a surface run or a solar operator, and HOA rules usually narrow it further.
- Wood gates warping in the dry heat. Near-zero humidity dries out and warps wood gate leaves, and the finish needs re-sealing more often than most homeowners expect. Metal gates don’t have this problem, but they develop different ones.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Henderson, NV
A typical single driveway gate with automation runs $4,200 – $8,500 in Henderson. A double swing gate with two operators lands at $8,500 – $16,000. Sliding gate projects run $6,500 – $12,000. Pedestrian gate installs sit lower, usually $1,800 – $3,800 depending on how much matching ironwork and latch hardware is required. Retrofitting automation to an existing manual gate is typically $2,400 – $5,200, and that number moves based on the power run and whether a proper post footing is required.
Local building permits, HOA architectural review fees, and matching-developer-spec ironwork all affect where the range lands. The flat price is written and handed to you before work starts, and it doesn’t change at invoice time. The quote you get is the number you pay.
We Also Serve Cities Near Henderson

We cover Henderson and the surrounding areas including Boulder City, Whitney, Paradise, and Enterprise. If your home is anywhere in ZIP codes 89015, 89002, 89052, or 89009, we can confirm a scheduled appointment and written quote.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Henderson

Yes, in most cases. The question is where the power comes from. Many Henderson gates were set manual at build-out with no conduit run to the pilaster, so the operator has to be fed from the house by a surface run, or you go with a solar gate opener. HOA rules in Green Valley, Anthem, and Seven Hills sometimes limit visible equipment. We measure the run, photograph the pilaster, and quote both options so you can see the difference. Call (844) 797-4861 for a free written quote.
Usually because the hinge post has shifted, not because the hinge bolts have loosened. Henderson’s caliche-laden soil expands and contracts with the seasons, and a surface anchor set into caliche moves with it. On sloped lots in Anthem and Seven Hills the problem shows up faster because hillside wind load puts more torque on the post. The fix is a proper concrete footing, not more tightening.
Yes. Any gate visible from the street, or one that replaces existing ironwork inside a master-planned community, typically requires HOA architectural review. The gate has to match the developer-era wrought-iron profile and stucco finish before installation goes in. We photograph and document what’s installed so you have a full record to submit. Call (844) 797-4861 and we’ll walk through what your HOA will need.
The heat drives lubricant off the moving parts. In Henderson’s 110°F+ summers, a builder-grade swing-gate operator loses its grease faster than most maintenance schedules account for, and the arms start grinding on a dry pivot. It’s a wear problem, not a part failure. We service all nine major automation brands, so the fix is a scheduled lubricant-and-adjustment visit, not a replacement.
A swing gate pivots on hinges and needs room to arc open, while a slide gate travels along a track and needs lateral clearance. Swing gates are more common on shorter, wider Henderson driveways; slide gates make sense on long flat lots in Green Valley and MacDonald Ranch where there’s room for the track and the ground doesn’t shift. On hillside lots in Anthem and Seven Hills, the sloping grade usually pushes the answer toward swing with a proper post footing. Call (844) 797-4861 and we’ll measure your opening before recommending either.
Get a Written Price Before Any Work Starts
If you’re ready to plan a gate install in Henderson, call Vance Gate Repair Whitney at (844) 797-4861 for a free estimate. A live person answers at any hour. You get a written price before work begins, a photo record when the job is done, and the 365-Day Done Right Promise covering every completed install for one full year.
Written by the team at Vance Gate Repair Whitney.
