Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Whitney
If your driveway gate has started stopping halfway, reversing on its own, or dragging on the concrete, we can help. Vance Gate Repair works on the gates and operators that fill Whitney’s HOA-governed subdivisions, from the builder-grade slide operators in the newer tracts off the 215 to the shared block-wall pedestrian gates that run the perimeter of nearly every community here. We know the housing stock, we know the caliche soil that shifts posts out of plumb, and we know that a repair has to satisfy more than the hinge. Call (844) 797-4861 and a live person picks up, day or night.
Why Vance Gate Repair Whitney Is Whitney’s Preferred Gate Repair Company
Whitney homeowners tend to do their homework before they call. They’ve read the three-star reviews, they’ve gotten one verbal quote already, and what they want is a number on paper before anyone touches the gate. That’s the whole basis of how we work under The Haven Standard: a written scope, a written price, and a photo record of what was found and what was changed. No “call for a quote.” The flat price is in your hands before work starts.
We’ve repaired and installed more than 22,000 gates since 2014, and every one carries a photographed record left with the homeowner. That documentation habit came out of commercial access-control work, and it matters in Whitney specifically: when your gate sits on a shared block wall and your HOA wants proof of what changed, a photo log with limit-switch readings and part numbers settles the question fast. Whitney customers get background-checked, uniformed technicians, a name and photo before arrival, and the 365-Day Done Right Promise covering the repair for a full year.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Whitney

Automatic Gate Repair
Most of the automatic gate calls we get in Whitney involve operators that were undersized for the gate from day one. Builder-grade units on developer-installed slides and swings start tripping breakers or reversing randomly after a few summers of 110-degree heat and hard UV. We work on nine major brands, so we fix the motor that’s already on your property rather than steering you toward a replacement.

Hinge & Post Repair
Whitney’s expansive, caliche-heavy desert soil moves, and hinge posts move with it. A post that was set shallow for a manual gate and then loaded with an operator sags within a season or two. We check the footing, re-set or shim the post, and verify the gate swings true before we call the job done.

Gate Realignment
When a gate drags, catches the latch, or gaps along the shared fence line, realignment is usually the fix rather than replacement. In Whitney’s subdivisions, realignment also has to bring the gate back into visual agreement with the rest of the perimeter wall, because a gate that hangs crooked gets flagged even when it operates fine.

Electric Gate Repair
Electric driveway gates here deal with voltage dips during monsoon-season storms, and a board that’s been hit a few times starts behaving unpredictably. We test the control board, the low-voltage wiring, and the safety photo-eyes (the infrared beam that stops the gate when something crosses the path), then document what we set. Our Gate Repair team handles the full range of electric and automated systems.
Before
AfterTrusted Brands We Service in Whitney
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we don’t carry a parts stock or push any single brand. If your gate runs a Linear slide operator, we work on Linear. If it’s a DoorKing on a community entrance, we work on DoorKing. Parts get ordered to the actual model number on your unit, which means the turnaround depends on the part rather than on which brand pays us best. One company, whatever motor is on the property.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Whitney Homes

Whitney’s tract housing went up fast in the late 1990s and 2000s, and the gate hardware reflects that. Here’s what we find most often:
- Builder-grade operators failing early. Developer-installed units run undersized components with no surge protection, so a handful of monsoon-season power fluctuations can take out the control board or leave the safety photocell misaligned by an inch or two.
- Automation added to a manual gate. When a homeowner adds an opener to a gate that was never designed for one, the post footing and conduit were never upgraded. You get sagging hinge posts and exposed low-voltage wiring that draws HOA and code attention.
- Shared block-wall gates settling out of alignment. Caliche soil movement throws latches out of line on the fence gates that connect to the community perimeter wall, and the fix has to meet the HOA’s visual standard, not just close the gap.
- Heat and UV drying out the drive. Rack-and-pinion gearing dries out and loses tooth engagement, and finishes bake and crack on metal gates that have seen a decade of desert sun.
Pricing for Gate Repair in Whitney, NV
Here’s what gate repair actually runs in Whitney. A hinge or post repair typically lands between $180 and $420, depending on whether the footing needs re-setting. Gate realignment usually runs $150 to $350. Automatic gate repair, the most common call here, runs $225 to $650, driven mainly by whether the control board or the safety photocell is the failed part. Electric gate repair with wiring work runs $250 to $700. Weld and rust repair starts around $200 and goes up with the extent of the corrosion.
Every one of those prices is written and handed to you before any work begins, and the 365-Day Done Right Promise covers the repair for a full year. If you’ve got a written estimate from another company, bring it and we’ll give you a free second opinion.
We Also Serve Cities Near Whitney

Whitney sits in the middle of the eastern valley, and we take gate work in the surrounding communities as well: Sunrise Manor to the northeast, Winchester and Paradise to the west, and Las Vegas proper. If you’re just outside Whitney and want the same written-price, photo-record process, the same team covers it. Start with Gate Repair in Whitney or call to confirm your area.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Whitney

The most common cause is a misaligned safety photocell or a failing control board, often both. In Whitney’s newer tracts, a builder-grade operator that has taken a few monsoon-season voltage dips will start reversing at random, and the rack-and-pinion drive may have dried out and lost tooth engagement. A technician should verify the UL 325 entrapment protection first, then check limit settings and the post footing. Call (844) 797-4861 for an exact quote, and the estimate is free.
Because the post footing was sized for a manual gate, not a motorized one. Adding an operator puts steady load and vibration on a hinge post that was never spec’d for it, and on caliche soil that already moves, the post drops or racks within a season. The fix is usually re-setting or shimming the footing and checking the conduit run at the same time. Call us for a written price before anything gets dug.
Only if it matches the association’s approved style and color for the shared block-wall perimeter, and that’s the part homeowners miss. A technician can make a gate swing perfectly and still leave you failing an HOA compliance inspection because the replacement hardware or finish doesn’t match the rest of the wall. We check the approved spec before ordering parts. Call for a free estimate and we’ll write the scope to the HOA standard.
The operator needs a working pair of safety devices, typically photo-eyes plus a sensing edge on the closing side, and they have to actually stop and reverse the gate when triggered. It’s a UL 325 requirement, and builder-grade installations sometimes have the photocell mounted but misaligned. We test both during the visit and photograph the readings. Call (844) 797-4861 and we’ll check yours.
Two reasons: the soil and the construction. Whitney’s expansive desert soils shift with the wet-dry cycle more than the older developed lots west of the valley, and the post footings on tract-built gates were set fast and light. Combine that with gates loaded by later automation and you get latches out of line sooner. Realignment in Whitney typically runs $150 to $350, quoted in writing first.
If your gate is dragging, reversing, or sitting crooked on a shared wall, the fastest way to a straight answer is a phone call. Dial (844) 797-4861 for a free estimate, and we’ll write the price down before anyone picks up a tool. A live person answers every hour, and the 365-Day Done Right Promise backs the work for a full year once it’s done.
Written by the team at Vance Gate Repair.