Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Sunrise Manor
If your driveway gate has stopped moving, is dragging on the concrete, or quit after the last heat wave, we can help. Vance Gate Repair Whitney handles electric gates, automatic operators, hinges and posts, and weld and rust repair for homeowners throughout Sunrise Manor, and we answer the phone at any hour at (844) 797-4861. We know this side of the valley well: the walled tract streets off Sahara Avenue and Lamb Boulevard, the RV gates packed tight against block walls in 89110, and the way the desert treats a gate hung thirty years ago. Before any tool comes out, you get a written price. That is the whole point of how we work.
Why Vance Gate Repair Whitney Is Sunrise Manor’s Preferred Gate Repair Company
Sunrise Manor homeowners tend to call us after they’ve already read the reviews, looked at the other quotes, and gotten tired of “we’ll get back to you on a price.” What sets us apart here is documentation. Every visit leaves a photo record of what we found, what we adjusted, and what we installed, filed and handed to you. That habit came out of commercial access-control work and never left. You get photos, a written scope, and part numbers in writing.
Our technicians have up to 12 years of experience, and every job is covered by the 365-Day Done Right Promise: if a repair isn’t right, we make it right at no added charge within that year. We’re independently owned and operated. A live person answers the phone 24/7, so you’re not leaving a voicemail at 11 p.m. when your only vehicle is stuck behind a dead gate. For Sunrise Manor, that matters more than a nice brochure.
We also bring a free second opinion to the table. If another company handed you a written estimate, bring the paperwork and we’ll review it at no cost. No pressure to switch, just a straight read on what’s actually needed.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Sunrise Manor

Because Sunrise Manor’s housing stock is mostly 1960s to 1990s tract homes with walled front yards, the work here leans toward hinge and post repair, automatic operator service, and weld and rust repair rather than new decorative installs. Here’s how each of those looks on a typical Sunrise Manor lot. You can see our full range on the Gate Repair service page.
Hinge & Post Repair in Sunrise Manor
Most sagging gates in Sunrise Manor trace back to a hinge post footing that settled or rusted out after decades of heat cycling in desert soil. We cut back the rust, sister or re-set the post with a deeper concrete footing, and correct the sag before we touch the operator. Getting the post right first saves you from paying twice.

Automatic Gate Repair in Sunrise Manor
When an older automatic swing or slide gate fails, the culprit is often a discontinued control board or a failed loop detector rather than the motor itself. We service FAAC, BFT, Linear, and Viking operators as well as the other major brands, so we work with the motor already on your property. Sometimes a retrofit with working safety photocells is the cheaper answer; sometimes the honest call is replacement, and we’ll tell you which.

Weld & Rust Repair in Sunrise Manor
Blowing sand and intense sun eat through light tubular steel pedestrian gates and latches, and monsoon gusts bend lighter gates out of square. We reweld hinge points, repair rusted-through frames, and re-hang gates so they latch fully again in those walled front yards. Weld work is priced in writing before we start the torch.

Gate Realignment in Sunrise Manor
A gate that binds and drags is usually out of plumb at the post, not misaligned at the latch. We measure the post, check the swing, and realign to the frame rather than shimming a symptom. On tight Sunrise Manor parcels, a few degrees of correction is often the difference between a gate that clears the driveway and one that scrapes every time.
Before
AfterTrusted Brands We Service in Sunrise Manor
We work on nine major gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t stock parts on a truck, so the brand on your gate doesn’t steer us toward a replacement you don’t need. We diagnose the actual failure, identify the right part, and order what’s required. Turnaround is usually fast for common operators, and we tell you up front if a part is discontinued. Repairs stay repairs wherever they can, and we document exactly what went in.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Sunrise Manor Homes

The failure modes in Sunrise Manor are pretty consistent, and they come down to age, heat, and the way these tract lots were built.
- Sagging driveway gates. On 1960s to 1990s tract lots, original hinge post footings settle or rust through after decades of extreme heat and monsoon-driven soil movement. The gate starts to drag, and the operator strains to push it.
- Obsolete control boards and discontinued operators. Older LiftMaster and Linear units often fail in summer heat and can’t be fixed with off-the-shelf parts. That forces a retrofit-or-replace decision we walk you through honestly.
- Sand-jammed slide tracks and rusted pedestrian gates. Blowing dust jams slide gate tracks and rack-and-pinion mechanisms, while rust eats through light tubular steel gates and latches. The result is a gate that sticks or won’t latch fully.
- Monsoon damage and missing safety devices. Wind gusts bend or unseat lighter gates, and many older automatic gates still lack working photo-eyes or edge sensors that meet UL 325 entrapment protection.
Pricing for Gate Repair in Sunrise Manor, NV
You should see the numbers before you call, so here they are. Hinge and post repair in Sunrise Manor typically runs $180 to $450, depending on whether the footing needs re-setting. Weld and rust repair runs $150 to $400. Automatic operator diagnosis and repair usually lands between $200 and $550 for common brands; a full swing-gate motor replacement runs roughly $850 to $1,600 depending on the brand and whether the arm bracket is intact. Gate realignment is usually $120 to $280. These are typical ranges for the Sunrise Manor market, not a quote. Every job gets a flat written price handed over before any work starts, and the price you agree to is the price you pay.
We Also Serve Cities Near Sunrise Manor

We work throughout the east valley, including Sunrise Manor and the surrounding communities of Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re just outside 89110, call and we’ll confirm coverage for your address before we schedule anything. Same written price, same photo record, same promise wherever we go.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Sunrise Manor

Usually it’s the control board, not the whole operator, but heat failure can mask a deeper problem. We test the board, the limits, and the motor separately before recommending anything. If the board is discontinued, we price a retrofit against a full replacement so you can see both numbers. Call (844) 797-4861 for an exact quote – estimates are free.
Repairs generally don’t require a permit here, and that’s one reason gate work in Sunrise Manor looks different from nearby incorporated neighborhoods. Because the area is unincorporated Clark County rather than City of Las Vegas, there’s no single city permit counter or inspection window driving the schedule. For replacements that might otherwise need plan review, we scope and document the job so the record is clear either way. Call us to talk through your specific project.
If the post is plumb and solid, hinge adjustment is enough, but on older Sunrise Manor tract lots the footing has often settled. We measure the post before deciding. When the footing is the problem, re-setting or sistering the post fixes it properly instead of shimming a symptom. Call (844) 797-4861 and we’ll give you a written price before any work begins.
Most jams come from blowing sand and dust in the track and rack-and-pinion, not from the operator itself. Cleaning and re-aligning the track usually clears it, and we check the rollers and rack while we’re in there. If the operator is still straining after the track is fixed, we’ll tell you. Call for a free estimate.
Modern operators require UL 325 entrapment protection, and older automatic gates often lack working photo-eyes or edge sensors. We can add safety photocells to most existing operators without replacing the whole unit. It’s a small addition that matters. Call (844) 797-4861 for a written price on the retrofit.
If your gate is stuck, sagging, or limping along on an old operator, call Vance Gate Repair Whitney at (844) 797-4861 for a free estimate. We’ll give you a written price before we start, leave a photo record when we’re done, and back the work under the 365-Day Done Right Promise. A live person is here around the clock.
Written by the team at Vance Gate Repair Whitney.