Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Sunrise Manor, NV
Most swing-gate motor replacements in Sunrise Manor run between $520 and $940, depending on the brand and whether the arm bracket is intact. Gate repairs that don’t touch the motor – a sagging hinge, a bent track, a latch that won’t catch – usually land between $120 and $310. We work across the 89110 ZIP with nothing but a written price in your hand before a tool comes out of the case. Call (844) 797-4861 and you’ll get a live person, day or night.
Why Sunrise Manor Homeowners Choose Vance Gate Repair Whitney
Sunrise Manor doesn’t have a single permit counter or inspection window the way the City of Las Vegas does – this is unincorporated Clark County, and that changes how gate work gets scoped and signed off. We know that difference because we work through it on the 89110 tract streets and the walled front-yard parcels where an RV side gate is often somebody’s only way out of the driveway. A stuck gate here can trap a vehicle outright.
The technicians we connect you with carry up to 12 years of experience and are background-checked and uniformed, with a name and photo provided before arrival. Under The Haven Standard, every visit leaves you with a photo log of what was found, what was adjusted, and what was replaced – the same documentation habit that shaped the company’s commercial access-control work. The 365-Day Done Right Promise covers all completed work: if a repair isn’t right, it gets made right inside that window at no charge. We service LiftMaster, FAAC, BFT, Linear, Viking, and four more brands, so we’re not going to steer you toward a replacement when the motor you already own can be fixed.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Sunrise Manor

Gate Repair
Hinge sag, rusted latches, and bent tubular steel are everyday work on Sunrise Manor’s older gates. We adjust, weld, and reset rather than replace when the gate has good bones. Learn more about our Gate Repair in Sunrise Manor.

Gate Installation
New driveway gates and pedestrian gates for the 89110 block lots, measured against your actual wall line and RV clearance. Learn more about our Gate Installation in Sunrise Manor.

Gate Motor & Opener
We repair and replace motors across nine automation brands, including FAAC, BFT, Linear, and Viking units common on swing gates here. Learn more about our Gate Motor & Opener in Sunrise Manor.

Gate Access Control
Keypads, remote receivers, and entry controls for light commercial and courtyard gates. Learn more about our Gate Access Control in Sunrise Manor.
Gate Parts & Welding
Replacement hinges, latches, rollers, and on-site welding for iron and steel gates showing heat and sand wear. Learn more about our Gate Parts & Welding in Sunrise Manor.
Before
AfterNeighborhoods We Serve in Sunrise Manor
We cover the residential streets across Sunrise Manor, from the tract blocks near Desert Rose Golf Course to the walled lots along Nellis Boulevard. Typical non-emergency response is same-day or next-day across most of the area, and after-hours calls are answered by a person, not a voicemail loop.
- Sunrise Arby
- Winchester-Meadows (89110 edge blocks)
- Desert Rose
- Vegas Manor
See the difference
Before
After
Before
After
Before
AfterWhy Sunrise Manor’s Climate & Housing Affect Gate Repair

The gates here take a beating that newer master-planned communities mostly avoid. Sunrise Manor is built out almost entirely on 1960s through 1990s single-story stucco tract homes on small lots, with block walls and either wrought-iron or tubular steel pedestrian gates and wide driveway gates for cars and RVs. Older iron rusts from the inside out, hinges sag, and latches wear until they won’t catch. Add the extreme desert heat, intense sun, and blowing sand and dust, and finishes fade and tracks jam faster than they would anywhere cooler.
Then comes monsoon season. Summer gusts and flash-flood downpours bend or unseat lighter gates – a problem the tight parcels around 89110 don’t forgive, because a bent driveway gate on a small lot blocks the whole approach. Heat-and-sand wear plus seasonal wind damage drive most of the service calls we get in Sunrise Manor, and that’s not decorative estate-gate work. It’s structural, and it’s the kind of thing we fix rather than talk you into replacing.
Pricing for Gate Repair in Sunrise Manor
Here’s what the work runs on these streets. Every price is quoted and agreed in writing before anyone starts.
| Service | Typical range |
|---|---|
| Hinge, latch, or track repair | $120 – $310 |
| Welding (iron or steel gate) | $180 – $420 |
| Swing-gate motor replacement | $520 – $940 |
| Motor or receiver repair | $160 – $380 |
| Access control install | $280 – $720 |
Ranges move with brand, parts, and whether the gate frame is sound enough to re-hang. The written price you get is the price you pay – no summary surprise at the end. Estimates are free.
Service Area – Cities Near Sunrise Manor

We also serve customers in Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re on the edge of Sunrise Manor and aren’t sure which side of the line your gate sits on, call and we’ll sort it out in one conversation.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunrise Manor

Most gate repairs here run $120 to $310, while swing-gate motor replacements run $520 to $940.
Welding jobs land between $180 and $420 depending on how much rust we find inside the frame. Call (844) 797-4861 for an exact quote – estimates are free.
Often, yes. Same-day and after-hours service is available across Sunrise Manor for stuck gates and collapse risk.
Because a jammed driveway gate on a tight 89110 lot can trap your only vehicle, call the moment it fails. A live person answers at any hour.
Usually. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we work with the motor already on the property.
Replacement only makes sense when the arm, board, or gearbox is genuinely shot. We’ll tell you which. Call (844) 797-4861.
Gate replacements in unincorporated Clark County don’t run through a City of Las Vegas permit counter, and expectations differ from the incorporated neighborhoods nearby. We scope the work to match.
Yes – every visit leaves a written photo log of what was found, what was adjusted, and what was installed.
That record is yours to keep and filed in the job, so a future technician never has to guess. Call (844) 797-4861 for a free estimate.
Written by the team at Vance Gate Repair Whitney.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Sunrise Manor Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.