Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Sunrise Manor
If the motor on your driveway gate has started to stall, click, or quit in the middle of its travel, we can help. Vance Gate Repair Whitney works on gate motors and openers throughout Sunrise Manor, from the tract streets off 89110 to the walled courtyards near Las Vegas Boulevard North. Sunrise Manor is unincorporated, which means gate work here runs on a different rhythm than inside the city limits, and knowing that saves you time. Call (844) 797-4861 and a live person picks up, day or night.
Why Vance Gate Repair Whitney Is Sunrise Manor’s Preferred Gate Motor & Opener Company
Homeowners in Sunrise Manor research before they call. They’ve read the three-star reviews, they want the price in writing, and they want to see what a technician actually found. That’s the way we work: written price before the tools come out, a photo record of every adjustment, and a 365-Day Done Right Promise on completed repairs.
We’ve handled 22,000+ gates repaired and installed since 2014, and every one carries a documented record the homeowner keeps. Our technicians have up to 12 years of experience, they’re background-checked and uniformed, and you get a name and photo before arrival. What we won’t do is recite a review count or a license number we can’t produce. We’d rather show you the paperwork on the job.
Local knowledge is the difference between a repair that holds and one that fails again by August. On Sunrise Manor’s 1960s – 1990s block-wall lots, an opener that seems “dead” usually has a hinge post that has crept and a rack full of blown sand. We’ve seen that pattern enough to check the gate before we test the motor.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Sunrise Manor

Motor Installation
A new operator has to match the gate, not the other way around. On the wide steel driveway gates common on Sunrise Manor tract lots, we measure weight, travel, and hinge condition before recommending a motor, then hand you a written price. Installation is scheduled, not dispatched, so there’s no rush that costs you a fit problem later.
We install slide and swing operators, including underground units for gates where the visible hardware needs to stay clean. If your gate backs an intercom or camera entry, we route and test it as part of the same written scope.

Motor Repair
Repair comes before replacement whenever the operator is serviceable. Most stalled motors we open in Sunrise Manor turn out to be a bound arm, a packed rack, or a limit switch set past its travel, all of which we can reset and photograph. When a control board or capacitor has baked in the sun, we quote the part in writing before we order it. If it’s not right, the 365-Day Done Right Promise covers the fix.

Linear Motor
Linear operators show up on a lot of the heavy steel gates around Sunrise Manor, and they’re tough when the rack is clear. Blown sand and grit is what kills them, grinding the pinion until the overload trips mid-travel. We clear and re-tension the rack, test the photocell, and confirm whether the motor itself needs work. Linear is one of the nine automation brands we service.

Slide Motor
Slide gates suit narrow Sunrise Manor parcels where a swing would hit a wall or the street. The trade-off is that the track and rack take the full force of desert grit. When a slide operator stalls halfway, the track is the first thing we check. We also handle battery backup so your gate still opens after a monsoon outage knocks the power.
For the full range of what we handle, our Gate Motor & Opener team covers repair, replacement, automation, and access control.
Before
AfterTrusted Brands We Service in Sunrise Manor
We work on nine major automation brands, and the goal is always to fix what’s already on your property. On Sunrise Manor gates that most often means FAAC, BFT, Linear, or Viking, plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t claim to keep parts stocked locally, because we don’t. What we do is identify the exact part, write the price, and get it ordered. One company that can service whatever motor you have beats a company that steers you toward a replacement you don’t need.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Sunrise Manor Homes

- Sand-packed rack and pinion. Blowing desert grit packs the rack and track until the operator strains, trips its overload, and stalls mid-travel on heavy steel driveway gates. Clearing and re-tensioning fixes more of these than any part swap.
- Monsoon damage to the hinge post. Gusts and flash-flood runoff rack a swing gate against its post, the footing shifts in the heat, and the opener arm binds even though the motor is fine. We check the post and sag before touching the motor.
- Sun-baked control boards and capacitors. Intense sun cooks opener housings, remote batteries, and control-board components. Combined with rust-dragged older steel panels, an aging or undersized operator can’t keep up.
- Century-old gate hardware on a modern motor. The 1960s – 1990s tract gates in 89110 were never built for automation. Sagging hinges and worn latches add drag that a properly sized motor should still handle, once the hardware is trued.
Pricing for Gate Motor & Opener in Sunrise Manor, NV
Prices below are written, flat, and handed to you before any work starts. A motor repair in Sunrise Manor typically runs $180 – $340, depending on whether it’s a reset, a capacitor, or a control board. Slide-motor repair with rack work runs $220 – $420. A full motor replacement generally lands between $650 and $1,400, depending on the brand and whether the arm bracket or rack needs replacing. Battery backup adds $160 – $320. Intercom integration runs $300 – $650, since it’s measured and wired as part of a planned job.
What moves the number is the gate, not the label on the motor: post condition, rack wear, and wiring all count. Estimates in Sunrise Manor are free, and we’ll review a written estimate from another company at no cost.
We Also Serve Cities Near Sunrise Manor

Sunrise Manor sits right against Whitney and Winchester, and we work those neighborhoods as readily as we do the tract streets here. We also cover Las Vegas and North Las Vegas. If you’re just over the line, you’re still in range. See how we handle Gate Motor & Opener in Sunrise Manor for the full local picture.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Sunrise Manor

On most Sunrise Manor tract lots, it’s the gate: a post that’s crept, a rack packed with sand, or a hinge dragging. A technician checks the post footing, clears the track, re-tensions the rack or chain, tests the photocell, and only then confirms whether the operator itself needs repair. That order matters, because replacing a perfectly good motor that was fighting a bound gate wastes your money. Call (844) 797-4861 for an exact quote; estimates are free.
No, and this is the local fact that shapes how gate work gets scoped here. Sunrise Manor is unincorporated Clark County, so there’s no City of Las Vegas permit counter or inspection window governing a driveway operator swap in 89110. Scheduling, sign-off, and warranty are worked out directly between you and the technician. That’s why we put the scope and price in writing before the job and leave a documented record when we’re done.
A properly sized solar setup can hold up, but the heat and sun are hard on panels, batteries, and control boards, so sizing and placement matter more here than in cooler climates. We check shade, panel angle, and current draw before recommending one, and we’ll tell you honestly if a wired operator with battery backup makes more sense on your gate. Call (844) 797-4861 to talk it through; estimates are free.
Test it: the gate should reverse or stop when something crosses the path of the safety photo-eye. If it keeps closing on an obstacle, the beam is misaligned, dirty, or dead, and that’s a safety problem you want fixed before anyone gets caught. We test and adjust photo-eyes on every visit and document the reading. Call (844) 797-4861 to schedule a check; estimates are free.
Most often it’s a drive-train problem, not a dead motor: a stripped gear, a disengaged manual release, a sheared arm pin, or a chain that’s come off its sprocket. In Sunrise Manor, a packed rack is also a common culprit. We diagnose the drive train, photograph what we find, and quote the fix in writing before any repair. Call (844) 797-4861 for an exact quote; estimates are free.
Written by the team at Vance Gate Repair Whitney.