A Vance company - serving Whitney, NV
Gate Parts & Welding in Summerlin, NV | Vance Gate Repair Whitney

Gate Parts & Welding in Summerlin - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Summerlin

If a hinge has given out on your courtyard gate or a stucco-pillared driveway gate is dragging against the ground, we handle the welding and parts work that fixes it. Vance Gate Repair Whitney works on Summerlin gates every week – from the wrought-iron pedestrian entries in The Ridges to the automated swing gates off Sahara Avenue – and we know how the village HOAs here expect a repair to look when it’s finished. Our technicians have up to 12 years of experience, we quote a written price before any tool comes out, and a live person answers the phone 24/7. Call (844) 797-4861 and we’ll get a technician out to your Summerlin gate.

Call (844) 797-4861

Why Vance Gate Repair Whitney Is Summerlin’s Preferred Gate Parts & Welding Company

Summerlin is a master-planned, HOA-governed community. Nearly every home sits behind a community wall, an entry gate, or inside a gated village, which means gate repair here is as much about compliance and approved hardware as it is about fixing a hinge. We understand that. A repair that’s structurally sound but doesn’t match the original village palette gets rejected at inspection, and we plan for that before we start.

Our reputation in Summerlin comes from documentation and price. Every visit leaves you with a photo log of what we found, what we adjusted, and what part number went in, filed in the job record. The price is written and handed over before work begins under Clause 1 of The Haven Standard. The 365-Day Done Right Promise covers every completed repair for a full year.

Response times to Summerlin are quick because the neighborhoods here are compact. Whether you’re off Hualapai Way in The Paseos or near the golf-course villages by Rampart Boulevard, we route technicians through the valley to reach you without a long wait. Background-checked, uniformed technicians arrive with a name and photo sent ahead.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Summerlin

professional gate repair service
Our Gate Parts & Welding Services in Summerlin

Hinge Replacement

A sagging gate usually traces back to the hinge, and in Summerlin’s 1990s and 2000s villages the hinge often outlives the weld holding it. We cut out the old hinge, realign the gate leaf, and weld in a replacement that matches the original profile. Most single-hinge replacements in Summerlin run $180 to $350 depending on whether the gate needs to come down.

Hinge Replacement

Post Replacement

When the hinge is sound but the gate still drags, the post footing is usually the culprit. Original footings in Summerlin settle and crack, and no amount of hinge adjustment fixes a post that’s tipped. We reset or replace the post, correct the footing, and weld the new post to match the stucco or iron finish the village requires. A post replacement in Summerlin typically lands between $450 and $900.

Post Replacement

Rail Repair

Rails take a beating from wind-driven dust and monsoon gusts. We straighten bent rails, re-weld cracked joints, and replace sections that have rusted through at the weld seam. On a decorative iron gate, we color-match the repair to the existing finish so the fix doesn’t stand out.

Rail Repair

Custom Welding

Custom welding covers everything from re-hanging a gate that’s pulled loose from its post to fabricating a replacement panel to match a village-specified design. Because Summerlin HOAs enforce the developer’s original gate colors and styles, we match the Howard Hughes-era palette on every weld and finish. That’s the detail a generic gate company misses.

If you’re not sure which service you need, our Gate Parts & Welding team can walk you through it on the phone.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 797-4861

BeforeBefore
AfterAfter

Trusted Brands We Service in Summerlin

Many Summerlin gates were automated at build-out with LiftMaster and FAAC operators, and we service both, along with Linear, Viking, Ghost Controls, and DoorKing systems. We don’t stock parts or steer you toward a replacement. If the motor on your property can be repaired, we repair it. If a board is discontinued and a retrofit is the cheaper answer, we’ll tell you that in writing with the numbers to back it up. Turnaround on parts is fast because we know which components are still available and which aren’t.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Summerlin Homes

Technician performing metal gate repair with an angle grinder
Common Gate Parts & Welding Problems We See in Summerlin Homes
  • Hinge post deterioration. Original footings in Summerlin’s 1990s – 2000s villages settle or crack, so gates sag and bind no matter how many times the hinge gets replaced. The fix starts at the footing, not the hinge.
  • Obsolete control boards. Early LiftMaster and FAAC operators installed at build-out now have discontinued boards, and after 15-plus years they run erratically or quit entirely. A board-level repair is sometimes possible; often a modern unit with current safety photocells is the better spend.
  • Stucco and finish fading. The desert sun powders stucco-clad pillars and fades wrought-iron finishes fast. Any repaint or panel replacement has to match the village’s approved palette or the HOA rejects it.
  • Heat-worn operators and photo-eyes. Months of 100°F-plus days degrade opener electronics, and misaligned photo-eyes trip the safety reverse. The dry climate spares the metal from rust a coastal city would see, but it’s hard on the electronics.

A typical call in Summerlin involves a 15 – 25 year-old wrought-iron pedestrian gate with a failing hinge post, or a stucco-clad driveway swing gate whose operator has a burned-out control board after years of heat. The usual fix corrects the post footing and hinge alignment first, because a sagging gate usually fails at the post, not in the middle. For legacy operators with obsolete boards, upgrading to a modern unit with current safety photocells is often the cheaper answer.

Get the price in writing before anything starts.Serving Summerlin - a real person answers, day or night.
Call now

Pricing for Gate Parts & Welding in Summerlin, NV

Pricing in Summerlin reflects the mix of decorative iron and stucco-clad gates here, plus the finish-matching the villages require. Hinge replacement runs $180 to $350. Post replacement, including footing correction, runs $450 to $900. Rail repair and smaller weld jobs run $150 to $400. Custom welding and panel fabrication depend on the design but start around $350. A board-level operator repair or a full operator retrofit runs $400 to $1,200 depending on the brand and whether the arm bracket is intact. You get the flat written price before any work starts, and it doesn’t change at the end. Estimates are free. Call (844) 797-4861 with your gate details and we’ll get you a number.

We Also Serve Cities Near Summerlin

Professional technician applying sealant for stone pillar gate repair
We Also Serve Cities Near Summerlin

We work gates across the west valley and the neighboring communities. If you’re in Spring Valley, Las Vegas, Winchester, or Paradise, we serve those areas too, with the same written price and documented photo record. For more on our full service across the area, see Gate Parts & Welding in Summerlin.

Serving Summerlin, NV – Our Local Coverage Area

We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Summerlin

Two professional workers installing a modern horizontal slat metal entry gate
FAQs – Gate Parts & Welding in Summerlin

Why Summerlin Chooses Vance Gate Repair Whitney

We set the standard for gate parts & welding in Summerlin.

30-60 Min Response

Fast dispatch across Summerlin. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Summerlin

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Summerlin - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Summerlin Customers Say

Trusted by homeowners across Summerlin and surrounding areas.

★★★★★

"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."

Nadine C.
★★★★★

"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."

Douglas N.
★★★★★

"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."

Camille R.

Ready for Gate Parts & Welding in Summerlin?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Summerlin.

(844) 797-4861

Request a Free Estimate in Summerlin

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch