A Vance company - serving Whitney, NV
Vance Gate Repair Whitney gate repair team

Gate Parts & Welding Near Me in Whitney - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Gate Parts & Welding Near You in Whitney, NV

If you’re searching “gate parts and welding near me” in Whitney, NV, you want someone who can put hands on the actual hardware, not read you a catalog. Vance Gate Repair Whitney supplies and fits gate parts and handles on-site welding for residential and light commercial gates across Whitney and the east Las Vegas Valley. Call (844) 797-4861 and a live person answers, day or night, with a written price before anyone touches a tool.

Most of the calls we take from Whitney start the same way: a sagging gate that drags on the driveway, a hinge that’s pulled loose from the post, a latch that stopped lining up when the weather turned, or a broken weld on a steel frame that’s been rusting quietly for two summers. You don’t need a full replacement for any of that. You need the right part, fitted correctly, and a weld that holds. That’s the work we do.

Key Takeaways

  • We fit gate parts (hinges, latches, rollers, tracks, brackets, stops) and weld steel and aluminum gate frames on site.
  • Written flat price handed over before work starts, every job, per Haven Standard Clause 1.
  • Technicians have up to 12 years of experience; every visit leaves a photographed record of what was found and what was fitted.
  • 365-Day Done Right Promise: if the repair isn’t right within a year, we make it right at no charge.
  • A live person answers (844) 797-4861 at any hour, including weekends and holidays.

Fast, Local Gate Parts & Welding

We treat “near me” as a promise, not a keyword. When you call, we confirm your cross streets, ask what the gate is doing (or not doing), and match the job to the technician who can get there fastest with the right parts for your gate type. For common failures – a snapped hinge, a worn roller, a latch that’s out of alignment, a weld that’s cracked at a post mount – we aim to be on site the same day across Whitney and the surrounding east side.

Every visit follows the same order: we inspect, we photograph the failing component, we write the flat price and hand it to you, and only then do we start. If the repair needs a part we don’t carry, we tell you the part number and the price before we order it. No surprise invoice at the end. No “we’ll have to see once we’re in there.”

Welding work is scheduled with the same front-loaded pricing. A steel gate frame repair, a re-weld at the hinge plate, a post bracket repair – each one gets a documented scope before the welder fires up. Under Clause 4 (Evidence on every job), you get a photo record of the weld and the part numbers installed, left with you and filed in the job record. That matters when the gate is a decade old and the next technician needs to know what’s actually behind the paint.

What Gate Parts We Carry and Fit

professional gate repair service
What Gate Parts We Carry and Fit

We service residential and light commercial gates and the hardware that keeps them swinging, sliding, and latching. Parts we regularly supply and fit on Whitney-area gates include:

  • Hinges and hinge plates – weld-on and bolt-on, for steel, aluminum, and ornamental iron gates.
  • Latches and catches – gravity, magnetic, and self-latching, including keyed options.
  • Rollers and trolleys – for sliding gates, matched to your track profile.
  • Tracks and track brackets – including replacement sections where the original has worn or bent.
  • Stops, guides, and end-caps – the small parts that decide whether the gate lines up or fights you.
  • Arms, brackets, and mounting hardware for gate openers and operators.
  • Steel and aluminum stock for welding repairs to frames, posts, and brackets.

If your gate runs on an automatic operator, we also handle the motor and control side. We service nine major automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so if the part that failed is on the operator rather than the gate itself, we work on what’s already on the property instead of steering you toward a replacement. For the full picture of what’s available, see our gate parts and welding in Whitney service page.

BeforeBefore
AfterAfter

How On-Site Gate Welding Works

Welding on a gate in place is a different job from welding in a shop, and it’s worth knowing what actually happens when we arrive:

  1. Inspection and photos. We photograph the failing weld, the surrounding frame, and the post mount so there’s a record of the condition before we touch it. Cracks usually start where a hinge plate meets the frame, or where a post bracket has been worked loose by years of swing.
  2. Written scope and price. You get the flat price in writing – what we’re welding, what we’re replacing, and what we’re leaving alone. Nothing starts until you’ve read it.
  3. Prep and grind. Old paint, rust, and failed weld material come off before new weld goes on. A weld laid over rust is a weld that fails in a year.
  4. Weld and cool. Frame joints, hinge plates, and post brackets get welded and allowed to cool properly so the metal doesn’t distort.
  5. Finish and re-hang. We touch up the weld area, re-hang the gate, check the swing, latch, and clearance, and adjust as needed.
  6. Photo record and handoff. Before we leave, you get a photo log of the weld and a written record of any parts installed. That’s the file you hand to the next technician, and the file we keep.

Welding involves open flame, live metal, and structural load. If your gate is holding up a heavy frame or has failed at a post mount, don’t try to brace it yourself – a loaded gate can come down without warning. Call us and we’ll assess it properly.

What Does Gate Parts & Welding Cost in Whitney?

Technician performing metal gate repair with an angle grinder
What Does Gate Parts & Welding Cost in Whitney?

Most gate part replacements in Whitney run $95 to $280 for the part and the fitting, depending on the hardware and whether the mount needs repair. On-site welding repairs typically fall between $150 and $450 depending on the weld and the prep work required. A full hinge plate replacement on a steel gate, including the weld, usually lands in the $200-$350 range. Sliding gate roller and track replacements tend to be lower – often $120-$220 – because there’s less prep involved.

These are real ranges, not bait. The exact price is written on paper and handed to you before we start, every job, per Haven Standard Clause 1. If you’ve got a written estimate from another company, we’ll review it free of charge – that’s our free second opinion, and it’s worth doing before you commit to a number.

Service Typical Range
Hinge or latch replacement (part + fitting) $95 – $280
Sliding gate roller and track replacement $120 – $220
Steel gate weld repair (frame, hinge plate, post bracket) $150 – $450
Hinge plate replacement with weld $200 – $350
Gate operator bracket or arm repair $180 – $400
Get the price in writing before anything starts.A real person answers, day or night.
Call now

Areas We Cover

Whitney is home base for our east-valley work, and we cover the surrounding neighborhoods and cities on the same schedule: Sunrise Manor, Paradise, Winchester, Henderson, Enterprise, Spring Valley, and North Las Vegas. If you’re just outside one of those, call and we’ll tell you straight whether we can get to you – no vague “we serve the greater metro” answer.

We also handle the associated gate services: gate repair, gate installation, gate motor and opener service, and gate access control. If you’re not sure whether your issue is a parts problem or an operator problem, describe it on the phone and we’ll point you in the right direction before anyone drives out.

Frequently Asked Questions

Professional technician applying sealant for stone pillar gate repair
Frequently Asked Questions

How fast can you get to my gate in Whitney?

Same-day service is typical for Whitney and the immediate east side, and we aim to be on site within a few hours for common part replacements and weld repairs. Call (844) 797-4861 and we’ll give you a real arrival window, not a four-hour block.

Do you serve my area?

Yes, if you’re in Whitney, Sunrise Manor, Paradise, Winchester, Henderson, Enterprise, Spring Valley, or North Las Vegas, we cover your area. Call us with your cross streets and we’ll confirm before scheduling.

How much does gate parts and welding cost in Whitney?

Part replacements typically run $95-$280 and weld repairs $150-$450, depending on the hardware and prep required. The flat price is written and handed to you before any work starts – no “call for a quote,” no surprise invoice. Call (844) 797-4861 for an exact quote – the written estimate is free.

Can you help after hours or on weekends?

Yes. A live person answers (844) 797-4861 24 hours a day, seven days a week – no voicemail loop, no callback queue, no automated attendant. If your gate is stuck open or a weld has failed and the gate won’t close, call and we’ll get a technician scheduled.

Call for a Free Written Estimate

If your gate is dragging, sagging, sticking, or cracked at a weld, we can look at it today. Call (844) 797-4861 for a free estimate in Whitney, NV – a live person picks up around the clock, and you’ll have the flat price in writing before we start. Every visit includes a photographed record of what we found and what we fitted, and every completed repair is covered by our 365-Day Done Right Promise. Independently owned and operated, up to 12 years of technician experience, and no job too small to document.

Written by the team at Vance Gate Repair Whitney, serving Whitney and nearby areas.

What Our Customers Say

★★★★★ 4.8 from 5+ reviews

"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."

- Nadine C.

"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."

- Douglas N.

"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."

- Camille R.
Need Gate Repair help in Whitney? Licensed & insured · 1-hour response · free estimates
Call (844) 797-4861

Request a Free Estimate

Tell us what's going on in Whitney. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch