A Vance company - serving Whitney, NV

Mighty Mule Keypad & Intercom Repair in Whitney, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Mighty Mule Keypad & Intercom Repair: The Whitney Owner’s Guide

Mighty Mule keypad and intercom repairs in Whitney typically run $185 to $420 installed, depending on whether the failure is in the keypad itself, the intercom module, or the low-voltage wiring between them. Most keypad swaps are finished in under an hour, and because a live person answers our phone around the clock, same-day dispatch is often possible when you call early. We’re an independent service provider, not affiliated with Mighty Mule, and we work on the brand without steering you toward a new operator.

Technician installing a gate access control unit on a brick pillar in Whitney, NV

Call (844) 797-4861

Owners in Whitney usually discover the failure the same way: the gate opens from a remote but the keypad beeps without releasing the latch, or the intercom crackles and the visitor’s voice never reaches the house. Sometimes it’s gradual – a code that takes three tries in July and works fine in January. That seasonal pattern is a real clue, and it’s worth noting before anyone quotes you a replacement.

Which Mighty Mule Models This Applies To

Mighty Mule’s keypad and intercom accessories cross several operator generations, and the compatibility gotcha catches people every time: the wireless keypad sold for the Mighty Mule 350 and 500 series will not pair with the newer MM-series control boards without the matching receiver, even though the keypad looks identical on the wall. The wired keypads use different terminal layouts between the older and current boards, so a keypad that physically fits can still be the wrong part electrically.

To identify what you have, read the model plate on the operator housing (usually a silver sticker under the arm cover), not the keypad face. If the plate is gone, photograph the control board’s terminal strip – the wire count and labeling tell us the series. We’ll match the OEM part when it’s the right call and a quality aftermarket equivalent when the OEM unit is discontinued or priced past what the job justifies. For homeowners in Whitney, that decision gets written down with the part number before we order anything. We also service LiftMaster, Ghost Controls, and DoorKing, so whatever motor is on your property, we can work with it.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Mighty Mule Keypad & Intercom Repair Is Failing

professional gate repair service
Signs Your Mighty Mule Keypad & Intercom Repair Is Failing
  • Keypad beeps but the gate won’t open. Usually a failed receiver board or a code that got wiped after a power blip. The beep means the keypad is alive; the dead gate means the signal isn’t reaching the operator.
  • Keys work only after several presses. Worn membrane contacts inside the keypad. In Whitney’s summer heat, the silicone keypad face hardens and the contacts behind it stop seating cleanly, and the problem gets worse each season.
  • Intercom crackles or goes silent one direction. Water in the speaker housing or a corroded low-voltage splice. Whitney’s monsoon weeks and irrigation overspray are the usual culprits when the housing seal has aged out.
  • Gate opens from inside but not from the keypad, or the reverse. A wiring fault between the keypad and the control board. The splice or the terminal screw has usually loosened or corroded.
  • Backlight flickers or dies. The keypad’s power supply is failing. A flickering keypad is a strong predictor of a full failure within a few weeks, so it’s worth catching early.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

Installed pricing in Whitney for a Mighty Mule-compatible keypad runs $185 to $320, and an intercom module replacement runs $240 to $420. The range is driven by three things: whether the wiring is intact or needs re-pulling, whether the part is OEM or aftermarket, and whether the control board needs a receiver added to pair the new unit.

Every quote is a flat written price handed to you before anyone picks up a tool. That covers the part, the labor, the wiring check, and the documentation. Under the Haven Standard, every visit leaves a photo log of what we found, what we wired, and the part number installed – so the next technician (or you, three years from now) doesn’t have to guess. The 365-Day Done Right Promise covers the repair for a full year at no additional charge if anything we did isn’t right.

DIY or Call Us?

Technician performing metal gate repair with an angle grinder
DIY or Call Us?

The honest split: you can safely check the obvious things. Confirm the control board has power, press each keypad button to hear the beeps, and look for visible water intrusion or a loose splice at the keypad housing. What you shouldn’t do is open the operator housing to trace low-voltage wiring to the control board. The keypad circuit shares a path with the operator’s logic board, and a crossed lead there can damage the board – which turns a $200 keypad job into a $600 board replacement. Gate operators also carry line voltage in the enclosure, so anything past the low-voltage terminal strip is a trained-technician job.

If the keypad is beeping but the gate won’t move, or the intercom is one-way, that’s the moment to call. Call (844) 797-4861 and we’ll get a written price in front of you.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

Frequently Asked Questions

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (844) 797-4861
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Vance Gate Repair Whitney responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch