A Vance company - serving Whitney, NV

Ghost Controls Keypad & Intercom Repair in Whitney, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Keypad & Intercom Repair: The Whitney Owner’s Guide

Keypad and intercom repair on a Ghost Controls system in Whitney typically runs $145 – $390 installed, depending on whether we’re reseating a keypad connection, swapping an intercom module, or replacing the post-mounted keypad itself. We handle these as scheduled repair calls, and because Ghost Controls keypads and intercoms are common on Whitney driveways, we can often get a technician out the same day you call. Most owners don’t realize the part has failed until the code stops taking at the gate or the intercom goes silent on one side.

Technician installing a digital gate access control keypad on stone pillar in Whitney, NV

Call (844) 797-4861

The pattern is usually a slow one. A code that worked yesterday needs two or three tries this morning. The intercom crackles in the afternoon heat, then clears up at dusk. Then one week the gate simply won’t respond to the keypad at all and the visitor-side call never reaches the house. By the time a homeowner in Whitney calls us, the problem has been building for weeks, and the part isn’t always what failed first.

Which Ghost Controls Models This Applies To

Ghost Controls builds its keypads and intercoms across a family of residential swing-gate operators, and the keypad wiring is broadly compatible across the line while the intercom modules are not. The wireless keypad (the post-mount pad that transmits to a receiver inside the control box) is the most common unit on Whitney gates. Wired intercom stations and the wireless intercom/intercom-plus-camera setups carry different transmitter and receiver pairs, so matching the module to the unit that’s actually installed matters.

Before we quote anything, we identify the operator by the model label inside the control box (the cover plate on the housing, not the arm), and we photograph the existing keypad and intercom wiring at the terminal block. The label tells us the operator family; the wiring tells us whether a prior install left the keypad on a shared power tap or ran a dedicated conductor. That second detail is where most mismatched replacements come from.

On the OEM-versus-aftermarket question, our honest position: for the wireless keypad, a quality aftermarket pad is often fine and cheaper. For the intercom module and the receiver inside the control box, we lean OEM, because the pairing between the intercom transmitter and receiver is where aftermarket units tend to produce intermittent dropouts under load. We stock neither, so we source the correct part to your model and give you the part number and price in writing before we order.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Ghost Controls Keypad & Intercom Repair Is Failing

professional gate repair service
Signs Your Ghost Controls Keypad & Intercom Repair Is Failing
  • The code takes two or three tries, then works. Worn pads on the keypad buttons or a fading receiver battery. If it’s intermittent, it’s usually the pad’s transmitter, not the operator.
  • The keypad lights but the gate doesn’t respond. A keypad receiving power (lights work) but not sending a valid signal points to a pairing fault or a failed transmitter inside the pad, not the gate motor.
  • The intercom is silent on the visitor side. The visitor station’s speaker or microphone has failed, often after a Whitney summer. Intercom speaker cones dry out and crack in the desert heat, and a phone that only works in one direction is the usual tell.
  • Static that comes and goes with the temperature. A loose wire at the intercom terminal block, or corrosion at the post connection. The afternoon heat expands the connection and the static clears overnight, which masks the real fault.
  • The keypad and the intercom both fail at once. This is rarely the parts themselves; it usually means the shared 12-volt tap or the wiring run has a fault upstream. Replacing both parts won’t fix it, and this is the case where an owner most often buys twice.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

Job Installed Price Range
Wireless keypad replacement (Ghost Controls-compatible) $145 – $215
Wired keypad reseat / reterminate at post $145 – $195
Intercom module replacement (per station) $215 – $340
Wiring fault repair at shared power tap $180 – $390

What drives the range is which part failed, whether the post wiring needs reterminating, and whether we’re replacing one intercom station or both. Parts and labor are itemized separately in the written price. We hand you the written price before any work starts, and the printed line items show the part cost and labor as separate numbers so you can see exactly what you’re paying for. Under the 365-Day Done Right Promise, if the keypad or intercom fails within a year of our repair, we make it right at no additional charge. Every visit also includes a documented photo record of the wiring we found and the part number we installed, left with you and filed.

DIY or Call Us?

Technician performing metal gate repair with an angle grinder
DIY or Call Us?

The low-voltage wiring on a Ghost Controls keypad and intercom is safer to touch than panel or motor work, but there are two things worth saying plainly. First, keypad and intercom circuits are low-voltage, but they share a power tap inside a control box that also feeds the operator. If you’re not certain where the low-voltage tap ends and line voltage begins, don’t open the control box. Second, the post wiring at a Whitney driveway has usually been weathering for years, and a loose or corroded connection you inadvertently disturb can leave the operator without a working limit or safety input. That’s the risk we see.

What an owner can safely check: whether the keypad lights come on, whether the code fails on every press or only sometimes, and whether the intercom is dead in one direction or both. Photograph what you find before you call. What you shouldn’t attempt: rewiring the terminal block, replacing a receiver inside the control box, or bypassing the intercom’s power tap. If the part fails and the fix is a replacement, call us at (844) 797-4861 and we’ll show you the written price first.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (844) 797-4861
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Vance Gate Repair Whitney responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch