Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Summerlin
If a hinge has given out on your courtyard gate or a stucco-pillared driveway gate is dragging against the ground, we handle the welding and parts work that fixes it. Vance Gate Repair Whitney works on Summerlin gates every week – from the wrought-iron pedestrian entries in The Ridges to the automated swing gates off Sahara Avenue – and we know how the village HOAs here expect a repair to look when it’s finished. Our technicians have up to 12 years of experience, we quote a written price before any tool comes out, and a live person answers the phone 24/7. Call (844) 797-4861 and we’ll get a technician out to your Summerlin gate.
Why Vance Gate Repair Whitney Is Summerlin’s Preferred Gate Parts & Welding Company
Summerlin is a master-planned, HOA-governed community. Nearly every home sits behind a community wall, an entry gate, or inside a gated village, which means gate repair here is as much about compliance and approved hardware as it is about fixing a hinge. We understand that. A repair that’s structurally sound but doesn’t match the original village palette gets rejected at inspection, and we plan for that before we start.
Our reputation in Summerlin comes from documentation and price. Every visit leaves you with a photo log of what we found, what we adjusted, and what part number went in, filed in the job record. The price is written and handed over before work begins under Clause 1 of The Haven Standard. The 365-Day Done Right Promise covers every completed repair for a full year.
Response times to Summerlin are quick because the neighborhoods here are compact. Whether you’re off Hualapai Way in The Paseos or near the golf-course villages by Rampart Boulevard, we route technicians through the valley to reach you without a long wait. Background-checked, uniformed technicians arrive with a name and photo sent ahead.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Summerlin

Hinge Replacement
A sagging gate usually traces back to the hinge, and in Summerlin’s 1990s and 2000s villages the hinge often outlives the weld holding it. We cut out the old hinge, realign the gate leaf, and weld in a replacement that matches the original profile. Most single-hinge replacements in Summerlin run $180 to $350 depending on whether the gate needs to come down.

Post Replacement
When the hinge is sound but the gate still drags, the post footing is usually the culprit. Original footings in Summerlin settle and crack, and no amount of hinge adjustment fixes a post that’s tipped. We reset or replace the post, correct the footing, and weld the new post to match the stucco or iron finish the village requires. A post replacement in Summerlin typically lands between $450 and $900.

Rail Repair
Rails take a beating from wind-driven dust and monsoon gusts. We straighten bent rails, re-weld cracked joints, and replace sections that have rusted through at the weld seam. On a decorative iron gate, we color-match the repair to the existing finish so the fix doesn’t stand out.

Custom Welding
Custom welding covers everything from re-hanging a gate that’s pulled loose from its post to fabricating a replacement panel to match a village-specified design. Because Summerlin HOAs enforce the developer’s original gate colors and styles, we match the Howard Hughes-era palette on every weld and finish. That’s the detail a generic gate company misses.
If you’re not sure which service you need, our Gate Parts & Welding team can walk you through it on the phone.
Before
AfterTrusted Brands We Service in Summerlin
Many Summerlin gates were automated at build-out with LiftMaster and FAAC operators, and we service both, along with Linear, Viking, Ghost Controls, and DoorKing systems. We don’t stock parts or steer you toward a replacement. If the motor on your property can be repaired, we repair it. If a board is discontinued and a retrofit is the cheaper answer, we’ll tell you that in writing with the numbers to back it up. Turnaround on parts is fast because we know which components are still available and which aren’t.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Summerlin Homes

- Hinge post deterioration. Original footings in Summerlin’s 1990s – 2000s villages settle or crack, so gates sag and bind no matter how many times the hinge gets replaced. The fix starts at the footing, not the hinge.
- Obsolete control boards. Early LiftMaster and FAAC operators installed at build-out now have discontinued boards, and after 15-plus years they run erratically or quit entirely. A board-level repair is sometimes possible; often a modern unit with current safety photocells is the better spend.
- Stucco and finish fading. The desert sun powders stucco-clad pillars and fades wrought-iron finishes fast. Any repaint or panel replacement has to match the village’s approved palette or the HOA rejects it.
- Heat-worn operators and photo-eyes. Months of 100°F-plus days degrade opener electronics, and misaligned photo-eyes trip the safety reverse. The dry climate spares the metal from rust a coastal city would see, but it’s hard on the electronics.
A typical call in Summerlin involves a 15 – 25 year-old wrought-iron pedestrian gate with a failing hinge post, or a stucco-clad driveway swing gate whose operator has a burned-out control board after years of heat. The usual fix corrects the post footing and hinge alignment first, because a sagging gate usually fails at the post, not in the middle. For legacy operators with obsolete boards, upgrading to a modern unit with current safety photocells is often the cheaper answer.
Pricing for Gate Parts & Welding in Summerlin, NV
Pricing in Summerlin reflects the mix of decorative iron and stucco-clad gates here, plus the finish-matching the villages require. Hinge replacement runs $180 to $350. Post replacement, including footing correction, runs $450 to $900. Rail repair and smaller weld jobs run $150 to $400. Custom welding and panel fabrication depend on the design but start around $350. A board-level operator repair or a full operator retrofit runs $400 to $1,200 depending on the brand and whether the arm bracket is intact. You get the flat written price before any work starts, and it doesn’t change at the end. Estimates are free. Call (844) 797-4861 with your gate details and we’ll get you a number.
We Also Serve Cities Near Summerlin

We work gates across the west valley and the neighboring communities. If you’re in Spring Valley, Las Vegas, Winchester, or Paradise, we serve those areas too, with the same written price and documented photo record. For more on our full service across the area, see Gate Parts & Welding in Summerlin.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Summerlin

Usually it’s the post, not the hinge. In Summerlin’s older villages the original post footing settles or cracks, and the gate sags and binds even after a new hinge. A technician checks the post alignment first; if the footing has moved, correcting or replacing the post is the fix, and the hinge is secondary. Call (844) 797-4861 with a photo and we’ll tell you which it likely is before we come out.
It depends on whether the board is still available. Early LiftMaster and FAAC operators installed at Summerlin build-out have discontinued boards, and a board-level repair is sometimes possible but not always the better spend. When a modern unit with current safety photocells costs less than chasing an obsolete part, we’ll say so in writing. Either way you get the number first. Call (844) 797-4861 for a free estimate.
Often yes, because Summerlin HOAs require gate colors and styles to match the original developer-specified village palette. Any weld, repaint, or panel replacement has to replicate the Howard Hughes-era specifications or it gets rejected at inspection. We match the palette and finish on every job so the repair passes. If your board needs documentation, we provide the photo record. Call (844) 797-4861 to talk it through.
Automatic gates need working safety photocells, and gates hung before modern safety requirements existed often lack them or have failed units. A photo-eye is the infrared beam that stops the gate if something crosses its path; when it’s misaligned or dead the gate can close on a person or vehicle. We check and reset these on every operator job. Call (844) 797-4861 if yours is tripping or missing.
Intense sun and 100°F-plus summers dry out hinges, bake finishes, and degrade opener electronics and photo-eye sensors, while monsoon wind and dust strain motors and winter overnight freezes crack brittle plastic parts. The dry air does spare metal from the rust a coastal city sees, but the heat is hard on anything electronic or painted. That’s why finish-matching and a documented record matter here. Call (844) 797-4861 for a free estimate.
Whether your gate needs a hinge, a post, a weld, or a full operator retrofit, we’ll show up with a written price and leave a documented record of what we did. Call Vance Gate Repair Whitney at (844) 797-4861 for a free estimate on your Summerlin gate – a live person answers any hour, and we’ll get a technician out to you.
Written by the team at Vance Gate Repair Whitney.