A Vance company - serving Whitney, NV
Gate Parts & Welding in Las Vegas, NV | Vance Gate Repair Whitney

Gate Parts & Welding in Las Vegas - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Las Vegas

If your driveway gate is dragging, your hinge post has shifted, or your operator dies every time the desert summer peaks, we can help. We work on gates across Las Vegas, from the 55+ communities of the northwest valley to courtyard gates in the older subdivisions near the 89108 corridor, and we quote the price in writing before anything gets touched. Call (844) 797-4861 and a live person picks up, day or night.

Call (844) 797-4861

Why Vance Gate Repair Whitney Is Las Vegas’s Preferred Gate Parts & Welding Company

We’re the gate specialist Las Vegas homeowners call when they’ve already read the reviews and want to know what the work costs before they commit. Our technicians have up to 12 years of experience, and every visit follows The Haven Standard: a written scope, a written price, and a photographic record of what we found and what we set. That documentation habit started in commercial access-control work and carried over to every residential gate we touch, which is why a future technician never has to guess what the limit switch was set to.

Las Vegas customers tell us the same thing again and again in reviews: nobody else showed them a flat price before the work started. We hand it over first, and it doesn’t change. Under the 365-Day Done Right Promise, if a repair isn’t right, we make it right at no additional charge within a full year. We also offer a free second opinion on any written estimate from another company, so bring the paperwork and we’ll go through it with you.

Response times to Las Vegas are quick, and our technicians arrive background-checked and uniformed, with a name and photo sent before they pull up. What we know about the valley matters too: this isn’t a storm market. It’s a sun market, and that changes which parts fail and when.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Las Vegas

professional gate repair service
Our Gate Parts & Welding Services in Las Vegas

Repair work here is about heat, UV, and soil movement, not wind and rain. That shapes what we fix and why. Our Gate Parts & Welding team handles the parts and metalwork that keep a Las Vegas gate hanging true and swinging clean.

Hinge Replacement

Sun-baked hinges seize and fight the operator every time the gate moves. When we replace a hinge in Las Vegas, we check the post alignment first, because a new hinge on a shifted post just fails again. Most hinge replacements run $95 to $210 per hinge depending on the load rating and whether the post needs attention.

Hinge Replacement

Post Replacement

Hinge posts shift after years of seasonal soil movement and thermal expansion, and that sag racks the operator pinion and strains the motor. We re-set the post footing and correct the sag before we refit hinges or weld a cracked rail, because patching the panel alone leaves the root cause. A post reset or replacement in Las Vegas typically runs $425 to $1,150 depending on depth, soil conditions, and whether concrete cutting is involved.

Post Replacement

Rail Repair

A cracked rail is common on original builder-grade ornamental steel that’s seen a decade of 105°F-plus summers. We weld and reinforce where the metal has fatigued, then check the gate’s tracking so the repair carries the load. Rail repair in Las Vegas usually runs $180 to $450 depending on how much framing needs to be rebuilt.

Rail Repair

Custom Welding

When a gate needs a bracket, a reinforcement plate, or a repair that no off-the-shelf part covers, we fabricate it on site. Custom welding in Las Vegas runs $140 to $400 for most residential jobs, and it’s often the difference between a repair and a full gate replacement. We also handle gate rollers and latch and lock hardware in the same visit where it makes sense.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 797-4861

BeforeBefore
AfterAfter

Trusted Brands We Service in Las Vegas

We work on whatever motor is already on your property, which means we’re not steering you toward a replacement when a repair will do. We service nine major gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Las Vegas’s 55+ communities, we most often see LiftMaster and Linear operators, and we know how those models behave after several brutal summers. We don’t stock parts, so turnaround depends on the part, but most residential repairs are scheduled within days. We never imply we’re exclusive to any single brand, and we never push replacement when repair is the right call.

Common Gate Parts & Welding Problems We See in Las Vegas Homes

Technician performing metal gate repair with an angle grinder
Common Gate Parts & Welding Problems We See in Las Vegas Homes
  • Battery backup failure after prolonged heat. In Las Vegas’s 55+ communities, a gate operator often fails not from heavy use but from months of idle time: batteries sulfate while residents are away for the summer, so a gate that worked in May is dead by October. A power cut then leaves someone locked in or out.
  • Hinge post shift from soil movement and thermal expansion. The northwest valley’s clay-heavy soil moves seasonally, and the post that carried a gate fine for years can tilt enough to strain the operator and rack the pinion. The fix is resetting the footing, not just tightening bolts.
  • UV-degraded keypads and remote receivers. Years of relentless sun leave keypad entry and remote receivers unreliable, and that’s often misdiagnosed as operator failure when the receiver is the real problem. We test both before recommending any replacement.
  • Chalking and peeling finishes. UV radiation and low humidity bake vinyl, wood, and even powder-coated steel until finishes chalk and peel. In HOA communities around Summerlin and Centennial Hills, a repaired gate’s finish must match the community’s approved shade or it can trigger a compliance issue, so we match the original color rather than guessing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Get the price in writing before anything starts.Serving Las Vegas - a real person answers, day or night.
Call now

Pricing for Gate Parts & Welding in Las Vegas, NV

We put the price on the page because you researched before you called and you deserve a number, not a handshake. A typical hinge replacement in Las Vegas runs $95 to $210 per hinge depending on load rating, and a post reset or replacement runs $425 to $1,150 depending on depth and concrete work. Rail repair usually lands between $180 and $450, and custom welding runs $140 to $400 for most residential jobs. A full gate operator replacement, if that’s what the diagnosis calls for, runs $650 to $1,900 depending on brand and whether the arm bracket is intact. Costs shift with how much post work is needed and whether the finish has to match an HOA color. The price is written and handed to you before any work starts, and estimates are free. Call (844) 797-4861 for an exact quote.

We Also Serve Cities Near Las Vegas

Professional technician applying sealant for stone pillar gate repair
We Also Serve Cities Near Las Vegas

We take gate parts and welding calls throughout the metro, including Winchester, North Las Vegas, Sunrise Manor, and Paradise. If you’re just outside Las Vegas and not sure whether you’re in our service range, call and we’ll tell you straight. The same written price and photo record apply wherever we work.

Serving Las Vegas, NV – Our Local Coverage Area

We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Las Vegas

Two professional workers installing a modern horizontal slat metal entry gate
FAQs – Gate Parts & Welding in Las Vegas

Get a Written Price on Your Las Vegas Gate Repair

Whether it’s a seized hinge in the 89149 corridor, a shifted post in a northwest valley 55+ community, or a welding repair that no off-the-shelf part will cover, we’ll show you the price before we start and leave you a photo record when we’re done. A live person answers at any hour. Call Vance Gate Repair Whitney at (844) 797-4861 for a free estimate.

Written by the team at Vance Gate Repair Whitney.

Why Las Vegas Chooses Vance Gate Repair Whitney

We set the standard for gate parts & welding in Las Vegas.

30-60 Min Response

Fast dispatch across Las Vegas. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Las Vegas

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Las Vegas - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Las Vegas Customers Say

Trusted by homeowners across Las Vegas and surrounding areas.

★★★★★

"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."

Nadine C.
★★★★★

"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."

Douglas N.
★★★★★

"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."

Camille R.

Ready for Gate Parts & Welding in Las Vegas?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Las Vegas.

(844) 797-4861

Request a Free Estimate in Las Vegas

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch